ICT: Diary
D: 28 W: 05
| < | January 2026 | > | ||||
| Sun | Mon | Tue | Wed | Thu | Fri | Sat |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | ||||
| 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 11 | 12 | 13 | 14 | 15 | 16 | 17 |
| 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| 25 | 26 | 27 | 28 | 29 | 30 | 31 |
[ < ]
Friday, 2 January 2026 [ >
]
labelle
Added the 24mm tape that is supported by the Dymo LabelManager PC II
diff .local/pipx/venvs/labelle/lib/python3.13/site-packages/labelle/lib/devices/dymo_labeler.py code/labelle/src/labelle/lib/devices/dymo_labeler.py
243c243
< SUPPORTED_TAPE_SIZES_MM = (24, 19, 12, 9, 6)
---
> SUPPORTED_TAPE_SIZES_MM = (19, 12, 9, 6)
Cynthion
Needed to update GTK to get packetry to run this was achieved with:
sudo apt install libgtk-4-dev
This upgraded GTK from 4.8 to 4.18, which allowed packetry to run.
My first test device was the Dymo LabelManager PC II plugged into the same Debian laptop that I was running cynthion from. Initially I was not capturing any packets as the capture mode was high speed (480Mbps), but when I switched it to Full (12Mbps) it started capturing. Successfully captured the printer printing a labelle --sample-pattern 256 using the Low (1.5Mbps) speed settings in packetry./p>
$Id: dates.htm,v 1
$Id: diary,v 1.38 2025/01/01 22:43:54 fred Exp $