ICT: Diary
D: 28 W: 05
| < | July 2025 | > | ||||
| Sun | Mon | Tue | Wed | Thu | Fri | Sat |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | ||
| 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 | 14 | 15 | 16 | 17 | 18 | 19 |
| 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| 27 | 28 | 29 | 30 | 31 | ||
[ < ]
Friday, 11 July 2025 [ >
]
Ender 3
Finally got my Ender 3 flashed with 4.2.7 firmware from Marlin. Initially when I put the firmware on the SD card and turned on nothing happened. Spotted a thread on Reddit where it mentioned that the firmware need to be name firmware.bin.
This upgrade has taken far to long.
Although first test print failed...
Bed leveling works but the Z height is about 5mm to high.
$Id: dates.htm,v 1
$Id: diary,v 1.38 2025/01/01 22:43:54 fred Exp $