ICT: Diary
D: 28 W: 05
| < | January 2019 | > | ||||
| Sun | Mon | Tue | Wed | Thu | Fri | Sat |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | ||
| 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 | 14 | 15 | 16 | 17 | 18 | 19 |
| 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| 27 | 28 | 29 | 30 | 31 | ||
[ < ]
Wednesday, 9 January 2019 [ >
]
Raspberry Pi 3 Model B V1.2
Copying an image to a 2Gb SD finished in 4 seconds and then I realised that FAT partition was only 8 Mb so only the first part of the image was being copied.
U-Boot 2018.09 (Sep 15 2018 - 03:19:53 -0600)
DRAM: 948 MiB
RPI 3 Model B (0xa02082)
MMC: mmc@7e202000: 0, sdhci@7e300000: 1
Loading Environment from FAT... WARNING at /usr/obj/ports/u-boot-aarch64-2018.09-aarch64/u-boot-2018.09/drivers/mmc/bcm2835_sdhost.c:408/bcm2835_send_command()!
WARNING at /usr/obj/ports/u-boot-aarch64-2018.09-aarch64/u-boot-2018.09/drivers/mmc/bcm2835_sdhost.c:408/bcm2835_send_command()!
Card did not respond to voltage select!
In: serial
Out: vidconsole
Err: vidconsole
Net: No ethernet found.
starting USB...
USB0: scanning bus 0 for devices... unable to get device descriptor (error=-110)
2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
U-Boot>
$Id: dates.htm,v 1
$Id: diary,v 1.38 2025/01/01 22:43:54 fred Exp $