ICT: Diary
D: 28 W: 05
| < | April 2015 | > | ||||
| Sun | Mon | Tue | Wed | Thu | Fri | Sat |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |||
| 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| 12 | 13 | 14 | 15 | 16 | 17 | 18 |
| 19 | 20 | 21 | 22 | 23 | 24 | 25 |
| 26 | 27 | 28 | 29 | 30 | ||
[ < ]
Wednesday, 1 April 2015 [ >
]
[1] Set serial baud rate to 9600
GPS
The raw GPS "NMEA" sentences are output on the serial interface as shown below:
[1] Set serial baud rate to 9600
cu -l /dev/cuaU0 then the arduino will pass the TX and RX straight through.
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPRMC,001044.799,V,,,,,0.00,0.00,060180,,,N*44
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,001045.799,,,,,0,0,,,M,,M,,*4FTime to build a Homemade GPS Antenna
$Id: dates.htm,v 1
$Id: diary,v 1.38 2025/01/01 22:43:54 fred Exp $